NOTICE OF APPRENTICESHIP OPPORTUNITY

FOR THE POSITION OF INSIDE WIREMAN (ELECTRICIAN) APPRENTICE

The Steubenville Joint Apprenticeship Committee of the International Brotherhood of Electrical Workers Local Union 246 of Steubenville, Ohio is recruiting a new class of apprentices. Applications will be accepted at the KW Gasser Training Center, which is in the rear of the I.B.E.W. Building at 626 N. 4^th Street, Steubenville, Ohio.

Applicants must apply in person and will be charged a $35.00 non-refundable application fee. CASH, CHECK, or MONEY ORDER. (Debit/Credit cards are NOT accepted.)

This committee will accept applications for apprenticeship beginning 9:00 AM – 12:00 PM & 1:00 PM – 4:00 PM on the following days and dates:

Monday—November 27, 2023            Monday— December 4, 2023
Wednesday— November 29, 2023      Wednesday— December 6, 2023
Thursday— November 30, 2023          Thursday— December 7, 2023
Friday— December 1, 2023                  Friday— December 8, 2023

Also, on the following dates beginning 1:00 PM – 8:00 PM:

Tuesday— November 28, 2023        Tuesday— December 5, 2023

---

THE APPLICATION PROCESS

To apply for any of the electrical apprenticeship programs, you must first complete an application form. Your application will be evaluated to determine whether or not you meet the local program’s basic requirements.

Applicants will be charged a $35.00 non-refundable application fee. CASH, CHECK, or MONEY ORDER.  (Debit/Credit cards are NOT accepted.)

TO BE ELIGIBLE FOR THE PROGRAM, THE FOLLOWING QUALIFICATIONS ARE REQUIRED:

• Applicants must reside in the Joint Apprenticeship and Training Committee’s jurisdiction in which includes Ohio Counties: Jefferson, Harrison, Carroll – portions south of Fox, Harrison, Rose, and Washington Townships, Columbiana – Center, Elk Run, Franklin, Hanover, Liverpool, Madison, Middleton, St. Clair, Washington, Wayne, West, and Yellow Creek Townships; West Virginia Counties: Hancock, Brooke – entire county except Buffalo Township.
• Each applicant must be a minimum of eighteen (18) years old at the time of registration, except that otherwise qualified applicants may be registered by the JATC prior to turning age 18 if permitted by state law.
• Each applicant must be able to work legally in the United States and provide a valid social security number.
• Each applicant must possess a valid Government-issued driver’s license.
• Applicants must be a high school graduate or have a GED. Each applicant must provide an official transcript(s).
• Applicants must submit a DD-214 to verify military training and/or experience.
• Each applicant will be required to take the Aptitude Test prepared by the electrical training ALLIANCE. Applicants who do not qualify for Direct Interview or Direct Entry must receive a minimum passing score of “4”.
• Each applicant must be capable of completing all requirements of the apprenticeship program and performing the work required of an electrical worker, with or without reasonable accommodations, including being able and willing to:
  • Safely perform or learn to safely perform the essential functions of the job;
  • Get to and from work at job sites anywhere within the geographical jurisdiction;
  • Attend and successfully pass all related instruction;
  • Understand and follow all JATC Rules and Policies;
  • Push, pull, crawl, crouch, and work in confined spaces such as attics, manholes, and crawlspaces, lift 25–50-pound objects on a fairly consistent schedule, and use various hand and power-assisted tools to install conduit, wiring, fixtures, devices, and electrical apparatus within commercial, industrial, and residential buildings;
  • Read, hear, speak, and understand instructions and warnings in English.

If you meet the basic requirements, you will be scheduled to take the NJATC aptitude test battery.
NOTE: Minimum requirements of test score can be waived if you have been working in the electrical construction industry and can provide undisputable documentation of 4,000 work hour experience).

Approximately one week after you take the test battery, the local JATC will receive the results. They will subsequently notify you concerning the disposition of your application. A full six (6) months must elapse before you may retake the test. The six month rule remains in effect after each subsequent retake of the test.

PLEASE NOTE: WILLFUL ATTEMPTS TO VIOLATE THIS RULE MAY RESULT IN PERMANENT DISQUALIFICATION.

If you obtain a qualifying score of ‘4’ on the test battery, you will be scheduled for an oral interview. You will be interviewed by a committee representing both NECA and the IBEW. Based on the interview, and a review of your qualifications, you will receive an overall ranking. Your name will be placed on an eligibility list for two (2) years. As new positions become available in the apprenticeship program, names will be taken off the respective eligibility list in order of the ranking score. Those selected must pass a drug screening test.

If you are not selected to begin an apprenticeship during that two-year period, you will need to reapply if you are still interested.

Applicants will be selected on the basis of qualification alone without regard to race, creed, color, or national origin in accordance with the objective standards.

A NOTE TO THOSE WITH DISABILITIES

We recognize and comply with our obligations under the Americans with Disabilities Act to not discriminate against qualified persons with disabilities.

If you are a person with a physical or mental impairment (including learning disabilities) that you believe may affect your ability to complete any aspect of the application process (including testing), and if you need an accommodation to ensure that the test battery accurately measures your skills and abilities, you must notify the AJATC/JATC before, or as soon as you are scheduled to take the NJATC aptitude test battery.

Accommodation requests given on the test day CANNOT be addressed that day. In most cases, you will need to provide:

• Documentation of your disability, and
• Documentation of the need for a particular accommodation.
• Your request will be considered promptly.

APTITUDE TEST INFORMATION:

A time and date will be scheduled at time of application.

These tests are validated for use by sponsors of IBEW/NECA electrical apprenticeship programs. They have been developed to assist in the selection of apprentices for the respective apprenticeship programs.

The fact that an applicant is not scheduled for an oral interview, as a result of this test battery, does not speak for the applicant’s ability, or lack thereof, to be most successful in many other occupations. This test was specifically developed to assist our program sponsors, helping them to select those who are most likely to succeed in our apprenticeship programs.

Many apprenticeship programs receive large numbers of applicants – four, five, six or more times the number of new apprenticeship openings (as defined by the limited number of job and training opportunities being available at a given time). The validated testing instrument is a tool to assist in the selection of the very best applicants that have an aptitude matching the specified job performance requirements. In this way, the number of applicants brought to the interview table is based upon objective, equitable, job-related criteria.

The test battery consists of two tests. It will take approximately two and a half hours to complete. The number of items and the amount of time allotted for each test are shown below.

You will take a short break between the Algebra and Functions Test and the Reading Comprehension Test.

INSTRUCTIONS FOR THE SAMPLE TEST

As part of the selection process, you may be required to take an aptitude test battery designed to determine whether you possess the abilities that will help you succeed within the electrical construction industry. The following pages provide a description of each of the tests and some sample test questions. These questions are similar to those on the actual tests, allowing you to know what to expect on the day of your test session.

You may use these items as a sample test and then check your answers with the key that appears on the bottom of this page.

You should read the sample questions on each test carefully and then examine each of the responses. Only one answer is correct for each question.

If you find some of the sample items to be difficult for you, you may want to review material that is similar to the sample items.

SAMPLE ALGEBRA AND FUNCTIONS

This is a test of your ability to solve problems using algebra. There are three (3) sample questions.

1. Consider the following formula:
   A = B + 3 ( 4 – C )If B equals 5 and C equals 2, what is the value of A?
   A.7
   B.11
   C.12
   D.17

2. ---

   Consider the following formula:
   y = 3 ( x + 5 ) ( x – 2 )Which of the following formulas is equivalent to this one?
   A. y=3×2+9x-30
   B. y=x2+3x-lO
   C. y=3×2+3x-lO
   D. y=3×2+3x-30

   ---

3. Consider the following pattern of numbers:
   110, 112, 107, 109, 104What is the next number in the pattern?
   A.97
   B. 99
   C. 106
   D.109

   ---

4. Consider the following formula:
   a = 1/2 b – 4Which of the following statements is true for this formula?
   A. When the value of b is less than 8, a is negative.
   B. When the value of b is greater than 8, a is negative.
   C. When the value of b is less than 8, a is positive.
   D. When the value of b is greater than 4, a is positive.

   ---

5. Consider the following table:

Which of the following choices represents the same relationship as demonstrated in this table?

B. Y = x/2 – 5

C. Y is equivalent to the difference between the value of X and a constant C, where C equals 5.

SAMPLE READING COMPREHENSION

This test measures your ability to obtain information from written passages. You will be presented with a passage followed by a number of questions about it. A sample passage is shown below, followed by three sample questions. This passage is shorter than those on the actual test.

Passage

The timing of New Year’s Day has changed with customs and calendars. The Mayan civilization, on what is now called the Yucatan peninsula of Mexico, celebrated the New Year on one of the two days when the noonday sun is directly overhead. In the equatorial regions of the earth, between the Tropics of Cancer and Capricorn, the sun is in this position twice a year, once on its passage southward, and once on its passage northward. At the early Mayan city of Izapa in the southern Yucatan, the overhead date for the sun on its southward passage was August 13. The Mayans celebrated this as the date for the beginning of the New Year. Later at the more northerly Mayan site at Edzna, the corresponding overhead date is July 26. Analyses of Mayan pictorial calendars indicate that they celebrated the New Year on August 13 prior to 150 AD, and on July 26 after that year. This change has been explained by archaeological dating showing that 150 AD was the time that the Mayans moved the hub of their civilization from the southern to the northern site.

1. According to the passage, the sun at Edzna was directly overhead at noon on:
   A. July 26 only
   B. August 13 only
   C. July 26 and one other date
   D. August 13 and one other date

   ---

2. If the Mayans had moved their civilization’s center south of Izapa, their new date for celebration of the New Year would probably have been closest to which of the following dates?
   A. January 1
   B. February 20
   C. March 25
   D. September 15

   ---

3. Based on the information in the passage, which of the following statements is true?
   A. Mayans made Edzna the capital because it was more temperate than Izapa.
   B. All Mayans moved to Edzna in 150 AD.
   C. Mayans used calendars to mark the passage of time.
   D. The Mayan city of Izapa was destroyed in 150 AD.

SAMPLE TEST ANSWER KEY

Algebra and Functions
1. B
2. A
3. C
4. A
5. C

Reading Comprehension
6. C
7. D
8. C

REMINDERS FOR APPLICANTS

• For optimal test performance, get a good night’s rest and eat a nutritious meal prior to taking the tests
• Report to the test center early. It is a good idea to arrive at the test center at least 15 minutes before the scheduled testing time.
• On your scheduled test day, remember to bring a photo ID with you to the testing center. Your ID will be checked before you will be allowed to take the tests. No ID, No Test, No Exceptions!
• Do not bring a calculator. If you bring a watch with a built- in calculator, you will be asked to remove it during the test session.
• Plan on spending approximately 3 hours at the test center on your scheduled test day.
• Be sure to make arrangements for childcare ahead of time. Children will not be allowed at the test center.
• Do not attempt to retake the test battery for six (6) months after your last test date. If you retest before the six (6) month period has elapsed, your score will not be valid and you will not be allowed to retest for another six (6) months. Please take this warning seriously. This is YOUR responsibility.
• Make arrangements with the JATC before you report for testing if you will need special accommodations during the testing procedure.

QUESTIONS AND ANSWERS